Mace DVR0414 Especificaciones Pagina 39

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 39
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 38
Chapter 7 Frequently Asked Questions (FAQ)
1. When I start the DVR it beeps – what does that mean?
When the machine is powered up and started recording, it will sound a short beep, to confirm that everything is
good.
If the HDD can not be read, or there is a problem with the HDD the DVR will sound a long beep.
If communication with the controller panel is abnormal, or interrupted, the DVR will sound one long beep
followed by two short beeps.
2. The indicator light is flashing while recording – what does that mean?
When the indicator light is flashing, the DVR is having difficulties with the input signal from the Camera (there is
Video Loss). Check the video connections and wires. If the light is still flashing, the problem then is with the
HDD, and means the HDD read speed is too slow. You will need to change the HDD.
3. My Hard Drive has bad Clusters/Sectors or was damaged. What do I do?
If the bad sector of the HDD is not too large, the machine would quarantine that sector and ignore it (no recording
will be made to the bad clusters). If a large segment of the Hard Drive is damaged, the machine will shut the HDD
off, and display a warning on the monitor. In this case, it is recommended to change the HDD.
4. What kind of decoders and controllers can I use with this DVR?
This machine supports and will work with all decoders, and most control board / matrix devices available on the
market.
5. Can I connect more then one PTZ camera to the DVR?
Yes, the DVR will support PTZ control on all channels. To connect more then one camera as PTZ, you will need
to get a Protocol Decoder Splitter. Ask your dealer for more information.
6. Can the DVR support a CD-RW?
Yes, the DVR will write onto an external CD-RW, if connected through the machine’s USB port.
7. I want to operate this DVR off a car / boat battery. How can I do this?
This machine can run off a battery only if you connect it through an external power converter unit.
Vista de pagina 38
1 2 ... 34 35 36 37 38 39

Comentarios a estos manuales

Sin comentarios