Mace DVR0414 Especificaciones descargar pdf (Pagina 13)

Chapter 3: Quick-Start (Turning the DVR ON for the First Time)

Before starting the machine, make sure that a Hard Drive has been installed and all the lines are

connected correctly (refer to Chapter 2 for more information).

Start the DVR:

Plug the power line in; switch power button at the back of the recorder to ON; power indicator will light

on; DVR is starting.

The default four windows for the video output will appear on the monitor.

If the DVR was turned on during the set “Timed Recording” times, recording will start automatically.

To change the “Timed Recording” settings, go into Menu -> System Setting -> Timing.

Default “Timed Recording” is preset to 00:00 AM – 00:00 AM; ON (recording 24 hours a day).

Enter the Settings menu

Press Enter (password prompt will appear)

There are two levels of password (Guest, and Manager). At this point you need to enter the Manager

password.

Default password is “555555”. To enter this password press the “Play Next” button () 6 times.

For security reasons, we recommend you change the password.

To change the Manager password go to Menu -> Admin Settings -> Password

In the “Manage” field, enter your Manager password (any combination of the Playback Control buttons).

Press Enter

Enter this password again in the “Confirm” field.

Press Enter twice.

MAKE SURE TO REMEMBER THIS PASSWORD!

Power Blackout Recovery:

When the power is cut off during the DVR’s operation, the DVR will preserve the recorded

information and settings. When the power is back online, the unit will power itself up and continue

recording. To avoid Hard Disk failures, and for security reasons, we recommend the DVR to be

connected through a UPS (Uninterruptible Power Supply) device.

Recording Operations

The default recording mode of the DVR is 24-hour continuous recording; but it is also possible to change this setting.

The 0414 DVR supports four recording modes..

To change Recording Modes:

Timed Recording:

To change the “Timed Recording” settings, go into Menu -> System Setting -> Timing.

Default “Timed Recording” is preset to 00:00 AM – 00:00 AM; ON (recording 24 hours a day).

Navigate the different settings using the Left and Right buttons. To change values, use the Up and Down buttons, and

set the recording times for each day.

Manual Recording:

Press “Record” on the front panel. A recording menu will appear on the screen, with channels 1,2,3,4. The channels

that are highlighted are the ones that will be recorded. To toggle channel recording, use the Playback Control buttons

on the front panel.

The buttons are listed here, starting from the first button to the LEFT.

Use “Previous Play” button as Channel 1, Use “Play” button as Channel 2, Use “Slow Play” button as Channel 3, Use

“Fast Play” button as Channel 4. Press Enter to begin recording

If you wish to reset the settings to what they were before, press the “Esc” button.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 38 39

Comentarios a estos manuales

Sin comentarios

Mace DVR0414 Especificaciones Pagina 13

Comentarios a estos manuales

Relacionado con productos y manuales para Grabadores de vídeo digital (dvr) Mace DVR0414