Mace DVR0414 Especificaciones descargar pdf (Pagina 27)

Chapter 5 Network Operation (LAN / Internet)

The 0414 DVR does not need any client software (although client software can be used, and is included with the DVR)

You can install software updates, download recordings, modify settings, and control a Pan-Tilt camera and the DVR

through TCP (network or the Internet remote connection)

To establish a TCP-IP connection, please make sure the LAN connector on the back of the unit is properly wired to the

computer or router. You will need to setup the DVR’s server IP address, subnet mask and gateway, prior to connecting

to it. If there is no router on the network, you only need to set the IP address. If there are routers on the network, please

set the proper gateway and subnet mask.

To setup the network properties for the DVR, go to Menu -> System Setting -> Network.

Please make sure the DVR’s IP is unique on your network. We recommend restarting the DVR after setting up

its IP.

To test if the DVR is online

: On your computer, open Command Prompt (usually in the Accessories folder in your

start menu).

When command prompt opens, type the following (without the quote marks):

“PING ***.***.***.***” (the * stands for the numbers you chose to be the DVR’s IP address)

If your ping response is successful, you will get a reply from the DVR. If it is not, a “Request timed out” message will

appear (if this message appears, please double-check all proper connections and settings, restart the DVR, and try the

PING again).

To connect to the DVR

: Open your Internet Explorer browser. Input the DVR’s IP address into the Address field,

press Enter.

The first time you visit the DVR, the system will pop up the dialogue box to ask whether you accept ActiveX or not.

You should then choose “Yes”. The system will install the control automatically, and Web interface will appear.

6-1 – The Web Interface

Click the “Login” button on the top-left side of the loaded page.

Default login is “admin” and password is “admin”.

It is important to change this password! To change passwords and manage users, click on “Assistant” on the top-

right of the screen, choose “User Manage”. Click “Admin”. Click “Modify”.

You may now enter a new password. Click “OK” then “Save”.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 38 39

Sin comentarios

Mace DVR0414 Especificaciones Pagina 27