Mace DVR0414 Especificaciones descargar pdf (Pagina 32)

5. Config (System Settings)

Click the Config button on the top of the screen.

A dialogue box will popup that lets you configure the DVR.

Your options will be: General, Timing, Image, Alarm, and Motion Detection.

If a part of the menu (or a whole menu) is disabled (gray color), that means you have to set the setting up

LOCALLY on the DVR itself.

GENERAL – main controls of the DVR. Lets you instruct the DVR what to

do when HDD is full (overwrite existing recordings or stop recording), the

way a PTZ is controlled (protocol, address, baud) for each channel, and

Recycle Monitoring (instead of displaying one channel constantly, the

monitoring console will switch the channel viewed every X-seconds (set in the

Interval drop-down box).

TIMING – this is where you can set up the timed recording for the

DVR. As well as timed motion detection recording.

There are two time

periods for recording. The set time in Time 1 and Time 2 is independent with

the set time in Motion detection. There is no week setting for Motion

detection.

Timing of motion detection: User can set two time periods during which the

DVR will use motion detection (and trigger recording / external alarm).

The set time will only be taken into effect when it is set to ON. If both motion

detection times are set to OFF, the DVR will not use motion detection.

IMAGE – this menu is used to set up the image-controls such as quality and

transmission protocols.

Net Transmission Protocol - There are two types of protocol: TCP and

Multicast. If you want to be able to visit the DVR via internet, you must

select TCP; if monitoring will be done via Intranet (LAN) a Multicast protocol

is applicable.

Multicast: the user with control power can view the image at will and other

users can only follow this user to view the image. 5 users are allowed to view

at the same time. Able to monitor 4 channels at the same time. TCP:

each user can view the image at will. According to the need, user can choose

the different protocol.

If it is through outer Ethernet you must choose TCP. 2 users are allowed to view at the same time.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39

Sin comentarios

Mace DVR0414 Especificaciones Pagina 32