Mace MPR-HQ-800 Series Manual de usuario descargar pdf (Pagina 13)

15 12

 



In the Encode interface, click the snapshot button to input snapshot mode, size, quality

and frequency.

In the General interface please input upload interval.

In the Schedule interface, please enable snapshot function.

Please refer to the following gure for detail information. See Figure 2-8.



 

Please follow the steps listed below to enable activation of the snapshot function. After you

enabled this function the system can snapshot when the corresponding alarm occurs.

• In the Encode interface, click the snapshot button to input snapshot mode, size, quality

and frequency.

• In the General interface please input upload interval.

• In the Detect interface please enable the snapshot function for specied channels, or

in the Alarm interface please enable snapshot function for specied channels.

Please refer to the following gure for detail information. See Figure 2-9.



 

The system can automatically backup video and resume previous working status after power

failure

 

After logging in, the system is in live viewing mode by default. You can see system date, time

and channel name. If you want to change system date and time, you can refer to general

settings (Main Menu->Setting->General). If you want to modify the channel name, please

refer to the display settings (Main Menu->Setting->Display).



 

Note: You need to have appropriate rights to implement the following operations. Please

make sure the HDDs have been properly installed.

After the system booted up, it is in the default 24-hour regular mode. You can set record type

and time in the schedule interface.

In the main menu, from Setting to Schedule, you can go to schedule menu. See Figure 2-5.

There are a total of six periods.

• Channel: Please select the channel number rst. You can select “all” if you want to set

for all channels.

• Week day: There are eight options: which range from Saturday to Sunday and All.

• Pre-record: System can pre-record the video before the event is placed into the le.

The value ranges from 1 to 30 seconds depending on the bit stream.

• Redundancy: System supports redundancy backup function. You can check the

Redundancy button to activate this function. Please note, before enabling this

function, please set at least one HDD as redundant. (Main menu->Advanced->HDD

Management).

• Snapshot: You can enable this function to snapshot an image when an alarm occurs.

• Record types: There are three types: regular, motion detection (MD) and Alarm.

1 Recording status 3 Video loss

2 Motion detection 4 Monitor lock

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Comentarios a estos manuales

Sin comentarios

Mace MPR-HQ-800 Series Manual de usuario Pagina 13

Comentarios a estos manuales

Relacionado con productos y manuales para Grabadores de vídeo digital (dvr) Mace MPR-HQ-800 Series